TGH MIRRORED DRILLING JIGS FOR THE GSPEED TGH-V3 CHASSIS & THE GSPEED V1-C1 CHASSIS

TGH MIRRORED DRILLING JIGS FOR THE GSPEED TGH-V3 CHASSIS & THE GSPEED V1-C1 CHASSIS

TGH MIRRORED DRILLING JIGS FOR THE GSPEED TGH-V3 CHASSIS & THE GSPEED V1-C1 CHASSIS

TGH MIRRORED DRILLING JIGS FOR THE GSPEED TGH-V3 CHASSIS & THE GSPEED V1-C1 CHASSIS

$9.98

Shipping calculated at checkout.

INCLUDES TWO DIFFERENT JIGS TO LOCATE AND DRILL BOTH GSPEED V1-C1 & TGH-V3 CHASSIS FOR LOWER MOTOR MOUNT HOLES
WILL REQUIRE (3) M3 x 8 BUTTON HEAD SCREWS FOR SPUR HOUSING

DIRECTIONS

https://youtu.be/hqGZ6ldiAJo

REMOVE FORWARD MOTOR MOUNT
REMOVE (3) M3 SCREWS FROM SPUR SHAFT HOUSING
REMOVE SPUR SHAFT
FLIP SPUR SHAFT 180*
REASSEMBLE MOTOR MOUNT AND INSTALL (3) M3 x 8 BUTTON HEAD SCREWS (IN PLACE OF M3 x 8 CAP SCREWS) INTO SPUR SHAFT HOUSING

GSPEED V1-C1

Click on this link for the mirrored TGH skid plate and drilling jigs
https://bit.ly/36is9vy
USE SUPPLIED TRIANGULAR SHAPED JIG
INSTALL JIG USING ONE BOLT IN EXISTING SHOCK HOOP HOLE
JIG SHOULD FOLLOW CONTOUR OF SHOCK HOOP
DRILL THRU JIG AT OPEN HOLE INTO SHOCK HOOP WITH M3 OR .125" DRILL BIT
REMOVE JIG
REINSTALL MOTOR MOUNT IN CORRECT ORIENTATION WITH SPUR FACING FORWARD

GSPEED TGH-V3

USE SUPPLIED "L" SHAPED JIG
INSTALL JIG USING 2 BOLTS IN EXISTING SHOCK HOOP HOLE
JIG SHOULD FOLLOW CONTOUR OF SHOCK HOOP
DRILL THRU JIG AT OPEN HOLE INTO SHOCK HOOP WITH M3 OR .125" DRILL BIT
REMOVE JIG
REINSTALL MOTOR MOUNT IN CORRECT ORIENTATION WITH SPUR FACING FORWARD

← Back to Home page